A dollar tree wreath DIY is so much fun to do! It is easy to do which is why even kids can help out with it. You will be surprised how it turns out in the end!

ARE DOLLAR TREE CRAFTS ANY GOOD?
If this is your first time making crafts using dollar tree supplies, you are not going back to how you made crafts before! You are missing out if you don’t try making this dollar tree wreath DIY craft. I know what you’re thinking, the supplies are from dollar tree so the quality must be cheap.
It is very affordable since it is only a dollar but, prepare to be amazed by how this will turn out to be! Making craft projects using dollar tree items has been a trend for some time now. It is worth trying it out if you ask me.
Who wouldn’t want to buy inexpensive supplies that make wonderful Christmas decorations? Once you’ve tried this dollar tree wreath DIY, the outcome is going to be the same as the ones that can be bought in stores. Not to mention, those are very high priced.
WHAT IF MY DOLLAR TREE DOESN’T HAVE SOME OF THE SUPPLIES LISTED?
If some supplies are not available at a Dollar Tree store near you, that’s fine. You can always be creative and try substituting it with something else. Here is a list you can check for ideas when you want to try a different design for your dollar tree wreath DIY:
- Dollar Tree Nautical Rope
Instead of using a garland, you can use a nautical rope to wrap around the wreath form.
You can also make use of this beautiful garland with eucalyptus around it. Wrap this on your wreath form to have a classy decoration.
If the Dollar Tree near you is out of berry picks, you can easily replace those with these blueberry picks.
This Christmas wreath form can be styled in a variety of ways. You can also be imaginative and add to this DIY craft design. If you’re on a budget, though, a dollar tree wreath DIY is the way to go!

WHERE SHOULD I HANG MY CHRISTMAS WREATH?
There are a lot of places you can hang this. If you are having trouble figuring out the perfect place to put this great decoration, I’ve got you covered! Here is a list of ideas where you can hang your dollar tree wreath DIY:
- Front Door
This way, people passing by or guests that would come over will notice it right away. It is a nice spot to show off this adorable snowman decoration.
- Fireplace
Most fireplaces can be found at the center of the living room, making it a beautiful place to hang decorations.
- Window
This will add a nice effect to your windows as it can be seen from the outside of the house.
- Fence
You might need to make a couple of these snowman wreaths if you are planning to hang this on your fence.
- Dining Area Wall
This is a typical place where people hang their decorations. Just pick the right spot for it in the dining area.

THINGS NEEDED TO MAKE A DOLLAR TREE WREATH DIY
You are going to need the following things to make this holiday wreath decoration. Here is a list of the supplies:
- Dollartree 14 inch Wire Wreath Form
- 2 Dollar Tree Winter Garland Greenery
- Hot Glue Gun
- Paintbrush
- Scissors
- Dollar Tree Wooden Birdhouse
- Waverly Ink Chalk Paint (Or any black paint you have on hand)
- Waverly White Chalk Paint (Or any white paint you have on hand)
- Dollar Tree Berry Pick
- Wire Cutters
- Dollar Tree Winter Pick with Red Cardinal

HOW DO YOU MAKE A DOLLAR TREE WREATH DIY?
Once you have everything you need, we can start making this dollar tree wreath DIY! Follow the steps below for the best results!

STEP ONE: PLACE GARLAND ON THE WREATH
Grab your wreath form and your garlands. Wrap it around the form by attaching it in the middle of the wire. Then, you can secure its place by wrapping a small section of the garland around the wire.

Repeat the process for the other half of the wreath form.

STEP TWO: PAINT THE BIRDHOUSE
Get your birdhouse, paintbrush, and paint. The next thing you’ll be doing is to paint the birdhouse. Use white paint for the front, bottom, and sides of the birdhouse.

And use some black paint for the roof of the birdhouse.

It is up to you if you will need to coat another layer of paint but with this Waverly paint, a second coating is needed.

STEP THREE: PLACE BERRY PICKS
With the use of wire cutters, cut a small portion of the red berries off. Before you put hot glue on the berry picks, position them first on the wreath depending on how you want.

Once you are satisfied with how it looks, you can now dab hot glue on the berry picks and stick them onto the garland. Make sure to press down firmly to make sure it sticks.

STEP FOUR: FINISHING TOUCHES
When your birdhouse is dried up and ready, apply hot glue to the bottom and position it on the wreath.

Again, press down firmly just to be sure it really sticks to the wreath.

Remove the cardinal from the winter picks. Then, apply hot glue to the cardinal and stick it to the birdhouse.

Finally, stick the winter picks to the opposite side.

DOLLAR TREE WREATH DIY HOW-TO CARD
Now that you know all about Dollar Tree wreaths it is time to print the instructions or save the instructions. You can print off the complete supplies and instructions for making a dollar tree wreath DIY via the how-to card below.
If you don’t have time to print it off right now, no worries! Just save the pin to your Pinterest account by clicking the pin button located in the recipe card below.
If you make this craft and LOVE it…please come back and leave a 5-star rating. It would mean so much to me!
Christmas Cardinal Dollar Tree Wreath DIY

This dollar tree wreath DIY is fun to make and it is a great decoration to have at home!
Materials
- Dollar Tree 14 inch Wire Wreath Form
- 2 Dollar Tree Winter Garland Greenery
- Dollar Tree Wooden Birdhouse
- Waverly Ink Chalk Paint (or any black paint you have on hand)
- Waverly White Chalk Paint (or any white paint you have on hand)
- Dollar Tree Berry Pick
- Dollar Tree Winter Pick with Red Cardinal
Tools
- Hot Glue Gun
- Scissors
- Paintbrush
- Wire Cutter
Instructions
1. Start by wrapping the garland around the wire wreath form. To attach it in the beginning, I just wrapped one small section around one of the wires to secure it. Continue wrapping until you have wrapped the entire wreath form. I used 2.5 garlands.
2. Using white chalk paint, paint the front, sides, and bottom. Then paint the roof with the black chalk paint. I did two coats of paint
3. Next using wire cutters, I cut small sections of the red berries off and then placed them how I wanted before I added the hot glue to them. Then using the hot glue, add a dab to the backside of the berries and then press firmly onto the garland.
4. I added a thick line of hot glue to the bottom section of the birdhouse that would then attach it to the garland on the wreath. Press down firmly. I then removed the cardinal from the winter pick and hot glued it to the house with just a dab of glue and then added the frosted section of berries from that pick to the side of the birdhouse with some hot glue.
If you liked this dollar tree wreath DIY, be sure to check these other great crafts out:
- How to Make a Dollar Tree Snowman Wreath
- Unique DIY Grinch Wreath for Christmas
- Grapevine Wreath Ornaments with free SVG file
Be sure to PIN this for later and SHARE it on Facebook!

Leave a Reply